Easy to Making a Fruit Bowl With Wood Turning Tools

Easy to Making a Fruit Bowl With Wood Turning Tools - A block of wood 4 "to 5" thickness and number 12 "is a good bowl of fruit size. The size of your choice. You need to do two things. 1. Set the tower block of wood. 2. Make the tower block to it some. A big compass use to a circle of the size that you want to make sure that the center to check, use a punch to draw to mark the center tap nail punch on wood 1/4 "inches. With the line you have drawn with the compass as a guide, cut the line through the block off. I use a band saw, when I first start and do not have all tools; I used a chain saw to cut the corners. There are several ways to remove the wood; The basic idea is to get round wooden block as possible, which makes for less work and to start the process turning much easier.

Fruit Bowl With Wood Turning Tools

The next step of the turning block to connect your lathe. There are many ways to do this depending on your skills. I'm a soul cover the timber to hold for about a form of front panel use. This uses a block of residues that sticks to the back of the rotary block and the center of the circle in which he moved to the compass. Which side is the back is for you to decide. To a strong type of wood, oak, ash, walnut, etc. to use for the block. I reuse my block several times; My favorite is the white oak at least 3/4 diameter larger "thick, which does not want the screws on the front panel on the block. The block waste should be about 1" than the diameter of the front panel. Waste block must be focused on the transformation block; draw a circle on the block drop and the middle mark, drill a small hole in the middle (make sure that the hole is vertical) and place a small nail through the waste block. The nail is used to find the hole in the center of rotation of the block, remove the nail placed in front of the facade. The waste round block can with a band saw or cut corners on a table saw and block mounted on the front panel and switch which are in turn cut. The first time you connect the waste index faceplate lock the block, so you can connect each time to the front in the same way. Most apertures have an index mark. You are now ready to insert the block of waste for rotation, put a piece of heavy construction paper (brown paper) between the two parties (the glue on both sides of the paper), align the nail with the central hole in the block transform and fastening together. The reason why the paper between the rotary block waste block can drop the block of waste. Without damaging the fruit bowl After the glue dries the bezel combine rotate the block, then place the facade with the block rotation in the turret plate. Make sure that no movement between the block and turn the edge; give a healthy tug prior to the lathe. When replacing any movement of the block of waste.

You are now ready to use your wood-drawing tools to start; They are a roughing gouge, gouge and a bowl scraper must. Turn the fruit bowl will be the next subject of my next article. Be sure to visit my website at http://www.yourwoodturningtools.com/. Please send any comments or questions.